Correct Process to do Footings for Steel Fence Posts

Of the many procedures, this blog brings to you the correct process to do footings for steel posts. Make sure to follow each step line by line to get the best footings for the steel fence posts.

• At first, you will have to dig a deep hole precisely to be of 24 inches deep and around 12 inches in diameter. In case your post is bigger than 6 inches in diameter then you will have to make the hole larger, say at least twice the diameter of the post.
• Next, the gravel must be placed say like 6 inches deep down the bottom of the hole that you dug. The goodness of this gravel is that it will help to drain away from the water from your steel posts!
• Next, you will have to place the steel post on top of the layered gravel. Try to keep it in the center. You will need wood beams too! In order to keep the steel posts in their central position, you will have to place a wood beam on either side. Make sure to clamp the two beams together so that they squeeze the post between them! (Pro tip: Check the level of the steel posts and the wooden beams and keep them in proper level)
• The next step in the footing of the steel fence posts followed in Brisbane is the mixing of the concrete by obeying the directions mentioned by the manufacturer! Fill up the hole with the concrete. Make a trowel by angling the concrete into a mountain. This will help the water to drain away from the steel posts! Allow sufficient time for the concrete to dry.
• The last step involves the removal of the wooden beams. They were just added to aid the steel posts to be able to stand straight, so once the concrete dries up, these beams are removed. Now you will have to check the fence posts again to verify whether they are straight or not. Make sure that they are towards the center. You may ignore minor differences!

If you are in search of steel made products in Brisbane then make sure to purchase them from reliable shops. Not all dealers will speak fairly of the quality as some might trick you to buy the first copies of the original ones, which might appear similar but will tend to rust with prolonged usage.